Behind the Build
Behind the Build: Joinery Built to Fit a Room, Not a Standard Size
A wardrobe with its own lighting, a bathroom shelf above the tub and a pantry built around a fridge — a closer look at custom joinery measured and scribed to fit a real Coogee home, not a standard size.
Buy a wardrobe off a shelf and it comes in a standard size, built to fit a standard room that may or may not be the room you actually have. Built-in joinery works the other way around — the room comes first, and every carcass and panel gets measured and scribed to its real dimensions. That was the starting point for this wardrobe, bathroom and kitchen joinery project in Coogee.
The sliding wardrobe doors and the full-height kitchen pantry unit were the two pieces where that precision mattered most. The pantry in particular needed to integrate a fridge/freezer within its own footprint, which meant the carcass had to be built to the appliance's real dimensions rather than a nominal one — cut it wrong and there's no shimming a kitchen pantry back into alignment after installation.
Running LED strip lighting inside the wardrobe shelving added another layer most off-the-shelf storage never has to deal with: cabling and power had to be coordinated within the joinery itself during fabrication, not fitted afterwards. The lighting had to be part of the carcass from the start, not an accessory clipped on at the end.
Hardware is where the separate pieces of this project start reading as one job rather than three. The same bar-handle hardware used on the wardrobe sliding doors was carried through to the kitchen pantry, and the warm timber-veneer finish runs across the wardrobe, the open timber shelving above the bathtub and the pantry alike — three different rooms, one consistent material language.
None of it would hold together without the measuring and scribing done first. A wardrobe, a bathroom shelf and a kitchen pantry are three different briefs, but fitting all three to the exact dimensions of the spaces they sit in is what makes them feel like they were always meant to be there, rather than added in afterwards.
See the full scope in our Coogee wardrobe and kitchen joinery case study, or get in touch to discuss custom joinery for a home renovation in Sydney.